Sunrise Medical Quickie P-222 User Manual download pdf (Page 20)

930466 Rev. A

X. Operating Guide

2. To Program Your Chair:

a. Turn off power to the chair.

b. Insert Qtronix Programmer plug (A) into the

Programmer/Charger socket (B) on the front of

the joystick.

c. Turn on power to the chair; program as needed.

d. Remove plug and cycle ON/OFF switch to drive

chair.

NOTE– Review the Qtronix Programmer Owner’s Manual

for more details on how to program your chair.

NOTE– Program settings that are not matched for the

capabilities of the rider can result in serious

injury. Do not alter settings without the advice

of your health care professional.

C. THERMAL ROLL-BACK

Your chair has a thermal roll back circuit.

This protects the controller from damage due to over-

heating. In extreme conditions (such as repetitive hill

climbing) the circuit will decrease the power to your

motors. This allows the chair to operate at a reduced

speed. When the controller cools, the chair will return

to normal speed.

D. CIRCUIT BREAKERS

1. Notes–

Your Quickie P-222 has a single circuit breaker (A).

• In the unlikely event of a short circuit or heavy

overload, all power to your chair will be shut off.

• To reset your chair, depress the circuit breaker

button (A). A few minutes wait is required before

the circuit breaker will reset.

2. Repeated Shutdown:

If the chair continues to shut down after resetting,

have it serviced by a supplier.

X. Operating Guide

930466 Rev. A

A. PERFORMANCE CONTROL SETTINGS

1. It is vital to match control settings to your level

of function and ability.

2. Consult your health care professional and your

supplier to select the best control settings for

you.

3. Check and adjust the settings every six to twelve

months (or more often, if needed).

4. Adjust the control settings immediately if you

notice any change in your ability to:

•Control the joystick.

•Hold your torso erect.

•Avoid running into objects.

5. Control Settings are adjusted through the use of

the Quickie QTRONIX Programmer. See your suppli-

er if you do not own a Quickie QTRONIX

Programmer pad.

B. QTRONIX PROGRAMMING PAD (OPTIONAL)

Program settings beyond the ability of the rider

can result in serious injury. Consult your health

care advisor before you alter settings.

1. Notes–

The Qtronix Programmer lets you adjust the control

settings of the P-222. You can customize a program for

yourself or select the standard program.

• acceleration rate

• deceleration rate

• turn acceleration

• turn deceleration

• forward speed (max & min)

• reverse speed (max & min)

• turn speed (max & min)

• steer correct

• 4-axis joystick throw

• sleep timer

• read timer

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Comments to this Manuals

No comments

Sunrise Medical Quickie P-222 User Manual Page 20

Comments to this Manuals

Related products and manuals for Scooters Sunrise Medical Quickie P-222